尹艳红
,
杨金鑫
,
杨伟光
,
岳红云
,
王辉
,
YANG Shu-Ting
,
杨书廷
应用化学
doi:10.3969/j.issn.1000-0518.2006.11.012
以环氧化天然橡胶(ENR)和丁苯橡胶(SBR)为基质材料,利用相转换法制备了一种新型聚合物膜,热重(TG)分析结果表明,其具有良好的热稳定性,分解温度达300 ℃以上. 用扫描电子显微镜(SEM)和原子力显微镜(AFM)研究了聚合物膜的表面特性. 把该膜在浓度为1 mol/L的LiClO4/(V(PC):V(EC)=1:1)的电解质溶液中浸渍后制得了凝胶型聚合物电解质膜(GPE). 由不同环氧值(20%、40%和60%)的ENR在V(ENR):V(SBR)=1:1时制得的聚合物电解质膜机械强度分别为184、397和243 kg/cm2. 同时利用交流阻抗、线性扫描伏安等方法,对凝胶型聚合物电解质膜的电化学特性进行了系统的研究. 结果表明,当m(ENR-40):m(SBR)=40:60时所制备的聚合物电解质性能最为优良,室温下电导率和电化学稳定窗口分别达到了1.9×10-3 S/cm和4.7 V,同时和金属锂电极之间具有良好的界面性能.
关键词:
环氧化天然橡胶
,
丁苯橡胶
,
聚合物电解质
,
锂离子电池
,
交流阻抗
张鸿冰
,
倪乐民
,
徐祖耀
金属学报
经 LFG(ΔG~(γ→a))-Mogutnov(ΔG_(Fe)~(γ→a))、徐祖耀(Shu-A)(ΔG~(γ→a))-Orr-Chipman(ΔG_(Fe)~(γ→a))、徐祖耀(Shu-B)(ΔG~(γ→a))-Orr-Chipman(ΔG_(Fe)~(γ→a))组合,均可算得 Fe-Mn-C 合金的 Ms 温度且与实验值十分符合.所得结果经数学处理,得 Fe-Mn-C 系 Ms 与成分的关系为:Ms(K)=817.4-7513.4xc-4141.9x_(Mn)-32083.5x_Cx_(Mn)(LFG)Ms(K)=829.9-7580.5x_C-4166.0x_(Mn)-15727.8x_Cx_(Mn)(SHU-A)Ms(K)=829.2-7276.1x_C-2915.4x_(Mn)-43825.7x_Cx_(Mn)(SHU-B)其线性相关系数均大于0.992.C 和 Mn 浓度均使合金的 Ms 线性地降低,而碳的作用几乎是Mn 的两倍.处理中引入了合金元素交互作用项(x_Cx_(Mn)),表明 C,Mn 相互加剧对 Ms 的影响。随含 C,Mn 量的增加,相变驱动力均单调地增加,而不存在奇异点.Ms 和相变驱动力的计算值均依赖于ΔG_(Fe)~(γ→a)项.
关键词:
LIN Jialiu ZHU Shigen YU Zhenzong Tsinghua University
,
Beijing
,
China
金属学报(英文版)
The stress-strain relation for cast low alloy carbon steel at solidification temperature has been examined by the authors' own desingned apparatus for rheological properties measurement.The rheology model,the stress-strain constitutive equation and the rheological parameters therefrom of the cast steel were proposed.Thus the theoretical basis and calcula- ting data for computerized s#nulation on the stress-strain relation and thermal cracking of the cast steel were suggested.
关键词:
rheological behaviour
,
null
,
null
,
null
,
null
Canying CAI
,
Qibin YANG
,
Hongrong LIU
材料科学技术（英）
Assuming that the wave function , the Schrodinger equation can be written as . Neglecting the last two terms, an analytical expression of electron dynamical diffraction was derived by Qibin YANG et al. In this paper, the analytical expression is modified by further considering the second-order differential term . When the accelerating voltage is not very high, or the sample is not very thin, the reciprocal vector ɡ is large, the modification of the second-order differential is necessary; otherwise it can be neglected.
关键词:
Electron dynamical diffraction
,
null
JIANG Laizhu CUI Kun Huazhong University of Science and Technology
,
Wuhan
,
China
金属学报(英文版)
Studies were made of the calculation of fractal dimension of transverse impact fracture sur- face,and of the correlation between impact toughness of steel and parameters of free-cutting phase by means of the developed fractal geometry model of crack propagation.It is believed that the area fraction,f,of free-cutting phase is negligibly influential to the longitudinal im- pact toughness,as f1 .While the aspect ratio,saying ratio of length to width,of free-cut. ting phase is inversely influential to the transverse impact toughness.This may .be the reason why the transverse impact toughness of free-cutting steel containing more rare earth contrast to sulphur is even higher than the low sulphur containing steel.
关键词:
fractal geometry
,
null
,
null
Liu Zhengyi Fu Jian Zhuang Yuzhi South China University of Technology
,
Guangzhou
,
China Correspondent:LIU Zhengyi professor
,
Dept.of Mechanical Engineering No.2
,
South China University of Technology
,
Guangzhou
,
China
金属学报(英文版)
The nature of“white layer”found in 55SiMnMo steel subjected to friction test has been stu- died using TEM,SEM,X-ray diffraction and EPMA techniques.It is shown that the struc- ture of the“white laver”on the rubbing surface is duplex,consisting of a special martensite and some austenite.This layer may be 25—50 μm thick.It is ultrafine,with grain diametric approximately 30 nm.Its micro-hardness may be as high as Hm 1500 and is capable of cut- ting glass.It has superb corrosion resistance and resists tempering.Its mierostructure and hardness undergo changes only when the steel is tempered above 500℃.
关键词:
friction
,
null
,
null
中国腐蚀与防护学报
N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....
关键词:
Journal of Materials Processing Technology
The crystallization temperatures and other thermal properties have been measured systematically for two ternary Cu-Ni-P and two quaternary Cu-Ni-Sn-P amorphous systems. The dependence of crystallization temperature on the composition for the four alloy systems can not be described basically by the usual used Naka rule. The Gibbs free energy of crystallization can be calculated for the alloy systems with the model proposed by Shu et al. Using the calculated free energy of crystallization, it is still not possible to properly describe all of the crystallization temperatures of the alloy systems. However, it has been found that the correlation between the crystallization temperature and the content of the alloy systems can be reasonably explained by the nucleation and growth rates of a new phase for the classical theory of phase transformation. It has been established that the classical theory of phase transformation can be used to describe the thermal stability of the Cu-based amorphous alloys during their crystallization process. (C) 1999 Published by Elsevier Science S.A. All rights reserved.
关键词:
thermal stability;amorphous alloys;Cu-P based alloy systems;classical;theory of phase transformation;solid-liquid interface;structural model;glasses
盖红星
,
李建军
,
韩军
,
邢艳辉
,
邓军
,
俞波
,
沈光地
,
陈建新
量子电子学报
doi:10.3969/j.issn.1007-5461.2005.01.016
采用Shu Lien Chuang方法计算了AlInGaAs/AlGaAs应变引起价带中重、轻空穴能量变化曲线,在Harrison模型的基础上详细地计算了AlInGaAs/AlGaAs和GaAs/AlGaAs量子阱电子、空穴子能级分布并且进一步研究了这两种材料在不同注入条件下的线性光增益.进一步计算比较可以得出AlInGaAs/AlGaAs应变量子阱光增益特性要优于GaAs/AlGaAs非应变量子阱增益特性,因此AlInGaAs/AlGaAs应变量子阱半导体材料应用于半导体激光器比传统GaAs/AlGaAs材料更具优势.
关键词:
光电子学
,
应变量子阱
,
光增益
,
AlInGaAs
,
半导体激光器
颜慧成
,
郭征
,
张孟亭
,
张洪平
钢铁研究学报
引入变量m(冲量密度)和Yang-Mills型规范变换m=u+gradφ,将原始变量的N-S方程转化为规范-不变量形式,用自由质点法处理Voronoi元,对连铸结晶器弯月面处保护渣流动行为进行数学模拟.输出振动周期内的动态流场,然后结合一组试验数据进行计算,计算结果与实际情况相吻合,进而讨论了渣圈对液渣流动行为的影响,为研究结晶器弯月面处保护渣的行为和铸坯振痕的形成提供了一定的依据.
关键词:
连续铸钢
,
保护渣
,
流动行为
,
数学模拟
